WhatsApp fall? App goes down on the Android, iOS and Web – Globo.com

Users of WhatsApp are struggling to send messages on the afternoon of Thursday (31). Both the application and the web version of Messenger experience problems, so that Internet users can not send messages. On Twitter, many people complain about the fall of the app, which seems to be normalizing gradually since at 16.20

Five times of WhatsApp in 2015:. App went offline and was used in stroke

The problem arose both in 3G and in Wi-Fi, and applications for Android and iPhone, around 13:30 this New Year’s Eve. At 14:50, the service began to stabilize and users gradually returned to access the messenger normally. However, around 16h the crash was repeated, and no one knows the cause of instability yet.

In this case, users can open and read your applications normally received messages, but they are unable to send their own texts and archives and see the status of friends, as if the phone was no Internet.

The claims, moreover, have not been seen only in Brazil, as people around the world have reported problems. It is the first time the application goes down in our country since the controversy of the last 16 days, when the Justice Department ordered the operators to block the app in the country for 48 hours. The action, however, lasted for about 12 hours when an injunction restored the use of the program.

WhatsApp is even the best messenger? Comment on TechTudo Forum!

All Samsung’s flagships launched since 2014 will receive … – Tudocelular.com

The year 2015 is ending and there are still many devices to receive the Android 6.0 Marshmallow released at the end of September, showing that manufacturers will have enough work this coming year. Although there is no specific term, however, Samsung’s smartphone users launched 2014 here may be unconcerned because at least the flagships are already confirmed as upgradeable.

The practice of South Korea It is a kind of tradition for its high-end devices, being released at least two major upgrades to the family of Galaxy S and Note models since its first copies. In the case of the Galaxy S5 released in early 2014, this edition will be the 6.0 Marshmallow, since the device was even announced porting Android in its version 4.4 KitKat.

Remember that a few months we see reports that the new generation of green little robot is on internal testing with the old flagship South Korean, which can also be said for the Galaxy Note and the Galaxy Note 4 Edge released a few months after it. Another point to note is that the same applies to variants of the Galaxy S5, as the case of S5 LTE-A and S5 Active even if these devices have their marketing rather limited.

Obviously the fact upgrade their latest flagship is no more than an obligation on the part of Samsung, an obligation that is not taken into account with respect to the almost countless oriented models for markets intermediate and input, which means that your users can not rely on any guarantee that they will see Android on your Marshmallow version. Furthermore, other models which obviously have sufficient hardware to the system will likely be “forgotten”, as if the Galaxy Note 3 and even Galaxy alpha.

Since there is no formal forecast for the arrival New sweet to devices, there is no way to know when those awarded the update will receive in fact, it is likely that the Android N is already almost ready to be launched when this happens.

(updated on December 30, 2015 at 23:08)

Success on Android and iOS, Cooking Fever takes the fun of … – Tudocelular.com

After a long time making success in the two major mobile platforms on the market, the Cooking Fever finally lands in Redmond platform. The game developed by Nordcurrent bet on the theme of food to ensure many hours of fun while the player prepares customers dining and is only the desire to consume digital food.

You can preparing meals and desserts from around the world in this addictive game of time management. With the choice of unique locations, desserts and fast food counter oysters and oriental restaurant, you can practice your skills in different environments and with different cooking techniques. It will also feature more than one hundred ingredients to cook hundreds of delicious dishes, in addition to kitchen appliances: coffee makers and rice planted the pizza ovens and pipoqueiras. Experience even decorate their restaurants to attract more customers by offering free tasting for snacks such as cookies or cupcakes, all as in real life! Check out the launch trailer.

Among the resources available Cooking Fever highlight over 400 dishes to prepare using 150 ingredients , 12 unique locations, including deli, bakery, Chinese, pizza, seafood, Indian restaurant, coffee shop, sushi restaurant, Popsicle, paradise cocktail bar, van de empanadas Mexican sausage and coffee, with a promise to expand soon! There will be over 400 levels to complete and hundreds of improvements to achieve that goal.

Throughout the game you will not only cook, but also decorate his restaurant to attract more customers. You can even invent your own dish by mixing ingredients. And all this with a social touch to allow sharing via Facebook. Cooking Fever is a free game on all platforms . Requires Android 2.3+ and 47MB, and 92MB 6+ iOS or Windows Phone / Mobile 10 with free 70MB internal memory. The download links are below.

The ten best Android apps launched in 2015 – Globo.com

The best of 2015 applications for Android are famous companies: the Google Photos , the Apple Music , the Layout from Instagram and Periscope , among others. But developers lesser known also had their space on the platform of the Google , with Swift WiFi and Pintasking , for example, that were present in the cell and had thousands of downloads.

Download free the TechTudo app: tips and tech news on your Android or iPhone

We’ve compiled the top ten apps for Android in different categories launched this year, taking into account the classification of Google Play Store and the popularity ranking AppAnnie site. Check out the list and download it onto your mobile

1 -. Google Photos

Google Photos allows you to store free at cloud images up to 16 MP and videos in Full HD resolution, and create stories, movies and search photos by places and people.

One of the most interesting features is the automatic organization of the affairs of photos, done automatically. The tool is also able to make adjustments to images, such as changes in color and light and collages assembly, GIFs and even videos with soundtrack.

Google Photos occupies about 32 MB smartphone and also helps free up space. Once the photos and videos are uploaded to the cloud, you can delete them from the internal storage.

Download the Google
Photos

2 – Periscope

Twitter Bet, the Periscope is broadcast live video by cell phone. The tool integrates with microblogging, warns the followers of starting a transmission and allows interaction during streaming. Following the wave of apps like snapchat, transmissions are saved for others to watch later, but only for 24 hours.

The only limiting factor for the app is the connection quality. It must have a fast internet, especially one who is transmitting. The Periscope occupies 15 MB of phone memory.

Download the Periscope

3 -layout from Instagram

In the past, users of Instagram who wanted to gather multiple photos in a single post had to resort to third-party tools. This year, own social network launched the Layout application, making collage and facilitates the sharing of mounts, not only in Instagram itself, as in other social networks.

They can be picked up nine photos to make a composition. Customizing the placement and size of the images is very intuitive.

Filters and Instagram editing options can also be used in this app. It does not need an account on Instagram to use Layout, which has only 2 MB.

Download the layout

4 – Swift WiFi

The Swift WiFi facilitates access to open Wi-Fi connections, locating free networks, testing the safety and quality of the internet. The tool helps save the mobile network data packet and has always seeks to offer a faster alternative for users. According to the developers, the database is constantly updated with new access points.

The application also serves as a router for Internet 4G, 3G or 2G your smartphone. That way, you can “borrow” the connection to friends and transmit it to other phones or PCs. The Swift WiFi occupies 10 MB of memory smartphone.

Download the Swift WiFi

5 – DO Button by IFTTT

Do Button by IFTTT is a free application for Android that automates tasks. To set them off by simply pushing a button. Based on IFTTT platform, it supports multiple services and can be used from simple features like sending an email or show the way home; to more elaborate tasks such as record the time that you stayed somewhere.

The app suggests ready functions which can be edited according to the user’s needs. You can also create new functions for the button, using the tools available. Although work perfectly in Brazil, the app interface is in English. DO install Button on your smartphone occupies about 7 MB of storage.

Download the DO Button

6 – Pintasking

The floating Pintasking adds shortcuts to Android, leveraging the multitasking and giving quick access to your favorite applications. The application creates a side window with floating icons and displays the system screens, like a Windows task bar. The user can add to it not only applications, but also documents.

only problem with the app is the limitation of the free version, which adds up to two shortcuts to the sidebar and offers no visual customizations. At least the Pintasking is very light, with 3.1 MB.

Download the Pintasking

7 – Adobe Premiere Clip

Adobe brought to the Android one of its main tools this year. The video editor Premiere Clip came to Google’s system in December, with manual controls in a timeline where you can apply photos, videos and edit audio. There are tools for exposure control, shadows and colors, audio levels, adding soundtrack, video speed and even transition effects.

The application, however, has some problems such as the limitation of 1 GB for video editing and lack of organization of the internal file explorer. For further editing, you can export the file into Adobe Premiere Pro and continue on your computer. For being a more complete app, it takes up more space on your phone’s memory. There are about 50 MB

8. – Apple Music

In November this year, the Apple released its music streaming service on Android. Despite the negative ratings it received in the early days in the Google Play Store, the app has improved in recent updates and offers a complete music collection, competing directly with Spotify and Google Play Music, and offers access to the exclusive radio station Beats 1.

The basic plan of the Apple Music costs $ 4.99 per month (approximately R $ 19.90 at the current dollar exchange rate) and the family plan is available goes for $ 7.99 (about R $ 31.80), with the advantage of adding up to six accounts. You can try the service for three months without paying anything.

What is the most beautiful Android phone? Share your thoughts in the TechTudo

Forum

The application has 29 MB and can take up more phone’s internal memory, as the songs are saved for offline listening.

Download the Apple Music

9 – Microsoft Word

Microsoft’s productivity suite was released to Android tablets in early 2015. A few months later, the applications reached the smartphone as well. Word allows you to create documents using pre-defined templates, perform formatting, assemble graphics, among many other actions. The interface resembles the desktop version, but it is still optimized for smaller screens, touch sensitive.

Many of the Word features are available in the free version, but to get all the features you must have a subscription to Office 365. The application takes up about 65 MB of memory.

Download the Microsoft Word

10 – Microsoft Excel

Launched along with Word, Excel for Android enables you to create complete spreadsheets in both the smartphone as the tablet. The application has all the formulas of the traditional version and its interface is also similar to the desktop version.

For more advanced users, it must have a subscription to Office 365 for all resources. The application takes about 66 MB space for armazenamento.http: //www.techtudo.com.br/tudo-sobre/microsoft-excel-para-ipad.html

Google removes Java API Android Oracle – PCGuia

According to a report from VentureBeat site, Google announced that it will not use APIs (Application Programming Interfaces) Oracle’s Java in future versions of Android.

The Mountain View company will henceforth use the OpenJDK, an open source version of Java Development Kit of Oracle.

This, according to Google, will simplify the development of applications and services, which may be to the liking of its developer community.

Via Engadget, VentureBeat.

Now it’s for real! LG G3 starts to receive the Android Marshmallow … – Tudocelular.com

As we read in the message translation above, Android 6.0 Marshmallow is coming gradually to all owners of LG G3 unlocked in the country, often used by LG as a test phase to later realize the global release. This indicates that in early 2016 we have the package in other markets, if there are no problems like those that affected the version for LG G4.

Some users answered posting on Facebook stating that did not receive the packet OTA (Over the Air), but by LG tool for PC Android 6.0 Marshmallow was found without difficulty.

99% of Android users unaware of these functions! – Pplware

Android is a comprehensive operating system and packed with features, many of them unknown to most users. Did you know that you can have access to the programmer options?

You can, and you will find a world of options that did not have access before.

1. Access the programmer options

First of all it is necessary to activate the Scheduler options. To do this, you must go to Android Settings and open “About phone”. There should find the “Number of Compilation” or “Version number”, depending on the devices, and give some straight clicks on it until there is a message that is already a programmer.

You should now be back and, in the Settings menu, already appears “Programmer Options”, and then the various new options that had never contacted.

2. Always keep the active screen

If you need the smartphone remains with the always on screen, without being limited by the time the system imposes, then you can activate this option as a programmer. The screen stays on even when placing the smartphone charging.

But be careful! Do not forget to turn off the screen in order to use. Just a touch on common Power button.

3. Presenting ringtones

Want to have a full sense of where you are playing, or want to show someone in a more detailed way some detail of your smartphone, then you can enable the programmer Options a small point which is active in the place where you touch the screen.

4. Find the pointer

With this option it is possible to accurately measure the touch and the coordinates where slid your finger on the screen. Touching the screen and make a move, there’s a slight trace your route and the information is shown on a bar next to the top side.

5. Enable USB debugging

There are some applications that suggest the activation of USB debugging one of the most used and known to Android users, allowing computer software to communicate with the USB smartphone .

You can see here a practical example of the USB debugging utility.

6. Limiting applications in the background

With this option you can start to select the amount of applications that can remain in the background active. If, for example, enable the “No background processes”, to run an application, open another or out of it, it is closed

7. Show CPU usage

If you choose to enable this option, will come to you the information on CPU usage, a list which shows all active processes depending on the CPU instantly.

---

These are just some examples of the Programmer options that you can access on your Android, but there are many more to explore.

LG G3: leaks Android 6.0 official Marshmallow for installation … – Tudocelular.com

LG has updated the G4 for Android Marshmallow, connecting the antennas of users with high-end model of the previous generation. Yesterday (29) some specialized pages mistakenly published the arrival of the new version of the OS Green robozinho the LG G3, but the disappointment is being undone by members of the XDA forum.

Ensuring a final sportier year for many users, the XDA forum community managed to get their hands on an Android 6.0 Marshmallow official firmware for the LG G3 version D855. Including some users are managing to apply root access without major problems, as shown by the image below.

In the case of an image KDZ It must give off a bit of time and patience to check out all the manual installation steps (remember that the risks involved are to be made by users). The file over the air is not yet available and therefore, this update may not be the final version, but has shown quite stable, as evidenced by the video produced by one of the users of the XDA forum.

Interested You can find the downloadable files, instructions for manual installation and answers to questions on page dedicated to the file on the XDA forum, click here.

The LG G3 is available in Pontofrio by R $ 1,249 . The cost-benefit is good and this is the best model in this price range. To see the other 56 offers click here.

(updated on December 30, 2015 at 11:18)

<-

If you likes, share

• Tweet

->

N abandon Android Java Oracle in exchange for OpenJDK – Tudocelular.com

Large majority of Android apps using Java code as the programming language, being the exception for some games. But this operating system dependence, which also made in the interface language, should take no longer decreasing. In May, a group of Google engineers showed a new project called Sky, which uses the Dart programming language as a Java replacement – but it was not given information when we would see such a change

Improvements. brought by the Dart would be in some fast, responsive applications that run always stable without delay in view. This would allow seeing games and other app running at 120 frames per second in the smartphone screen while the current standard is 60 Hz – of course, for it would be necessary to have smartphones with screen with 120Hz refresh rate, something that we do not see the market.

While the Dart not leave the paper, Google announced a major change to the Android Java dependency. It was revealed that the company does not intend to rely on the Oracle proprietary APIs and use only open OpenJDK code. This discovery was made by analyzing the code of the next version of Android, called for now only N, and that was confirmed by Google to be one of the great innovations of the little robot in 2016.

 

“As an open-source platform, Android will continue to be built on the cooperation of the open-source community,” a Google spokesperson told VentureBeat. “In our next version of Android, we intend to move from Android Java libraries for an approach based on OpenJDK, resulting in the creation of a common code base for developers, which will facilitate the development of applications and services. Google worked for a long time and contributed to the OpenJDK community, and we look forward to further realize contributions to the OpenJDK project for the future. “

 

It was discovered when analyzing the Android code base that Google is working on this change since February. With this news, the company cut its time ties with Oracle – something that was intended with the move to the Dart language. Now we can only wait for Android N to seeing the benefits provided by the adoption of a fully free and open language developers.

Get back to contextual search on Android Chrome – Pplware

Google has all of its integrated services and make use of these unique way. Your browser, present in virtually all platforms, can naturally search the Internet and give users the best proposals.

The Chrome for Android, the browser of choice of this system, recently lost contextual research , a novelty that had arisen this year. Fortunately it’s easy to get her back, here’s how.

The search is, for most of the users of browsers, the most used function, and that the first turn when the use. Must therefore be fast and simple to use.

To make life easier for Chrome users on Android, and so they do not have to be to copy and paste the terms you want to search, I decided to give this browser the possibility, at a touch, research the terms that are on the web pages.

But this research, contextual call recently disappeared from Chrome. From the latest version that can no longer be used, as so far it has always been.

Google has not announced this change, but left the door open that he could be brought back, with a small ” trick. “

How to take back the Contextual Search Chrome Android

To be back this form of search need only have the Chrome released on Android. Can test their absence by selecting a single word and you’ll see that should just come up the basic options to copy or select all.

Open a new tab in Chrome and put the famous address to access the flags of Chrome, where will change a single parameter. Then write in the address Omnibar chrome: // flags and open that page

Once on that page should seek the Enable contextual search option and change its setting. The parameter must be changed from Template to On .

It appears the option to restart the browser, something they should do for this change is assumed and contextual search pass to be available in Chrome.

If it still does not arise contextual research should enable it in the Android settings. This step is not necessary for those who have used this research before.

from accessing the Chrome settings, choose the Privacy and at the end will see emerge the Play to research . Activate it!

This research is the simplest way to have all information about the terms they want to look directly at Chrome Android without having to copy and paste whatever is in this browser. Just tap a word and Google provides immediately related searches, without having to leave the page they are visiting.

Portuguese app Topdox ready to use on devices … – SAPO Tek

Founded two years ago by Nelson Pereira and Miguel Jesus, Topdox is a tool that allows users to read, edit, share and collaborate on any document format – Microsoft Office, OpenOffice, GoogleDocs, PDFs – on any platform cloud storage. – Dropbox, GoogleDrive, onedrive, Box

The application allows, among other functions, open and read any kind of document in any format (docx, odt, pdf, xls, etc.) without spoil the formatting and manage all documents, regardless of where they are in the cloud or local accommodation.

With the Topdox you can also export documents to PDF and make notes in those documents, and perform a search global, i.e., search for files in all clouds or the local property at the same time.

For short are planned possibilities how to export Microsoft Office and OpenOffice documents to PDF “on the fly”, fast editing Microsoft Word and OpenOffice documents and compress and decompress (zip & amp; unzip) files and folders.

Now available for Android, the Topdox already has more than 160,000 users in 120 countries on its Web versions and iOS.

Google is promoting its applications for Android and iOS – Tudocelular.com

Google is one of the companies with more sectors in the technology market, as well as having the world’s largest search tool, she even studies of autonomous vehicles sector. In addition, Larry firm Page produces various products and services, which include some of the most popular applications on the market, is precisely why from time to time it is necessary to advertise their options.

Google Alphabet division is now conducting an advertising strategy of its iOS and Android apps. Upon entering the engine is already possible to see the advertisement, just below the search box is described “Discover the best of Google Android and iOS.”

When you click the link you can view a list of popular applications that are available for Google and Apple platform. Among the most popular for both systems are Chrome browser, Google Maps, Google Photos, Google Translate and YouTube, the latter which is one of the most famous.

Snapseed, Gmail, Hangouts and Google Drive are other applications are also being promoted by the company. Interestingly, despite the promotion, some of them are already pre-installed on the Android platform devices.

If you click the link with the options for iOS will be presented several options with versions for iPhone and iPad. Advertising is especially important for iOS, since most applications are not preinstalled on Apple devices, such as YouTube itself, which is currently one of the most popular Google.

Galaxy S4 gets Android 6.0.1 ROM Marshmallow thanks to … – Tudocelular.com

Samsung should not contemplate the Galaxy S4 with an official update of Android Marshmallow, as we saw in the leaking of a list of eligible appliances by the Korean manufacturer. But after an immature ROM available on the XDA forum in late October, behold, now we have a stable option and with all the features of CyanogenMod 13.

Based on the Android 6.0.1 Marshmallow the alternative ROM Resurrection Remix promises to bring the Galaxy S4 I9505 the latest features of Google’s mobile system, in addition to stability and new developments that are merged into the largest independent development community, CyanogenMod.

Between the main features of the custom ROM can cite theme Dark Material, buttons, mods for battery, shortcuts to the lock screen, customize the status bar, animations, quick release, optimization of autonomy, and more. Below you can see download links and step by step installation

Prerequisites:.

• Back up all important data (a thorough cleaning will be needed.)

 

• Enable USB Debugging in Settings & gt; Development Options & gt; USB debugging.

 

• Galaxy S4 I9505 should be with root access, unlocked and with a custom recovery (TWRP or CWM).

 

• Battery with at least 60% charged.

 

• The user must bear all risks involved in the upgrade process.

 

How to update the Galaxy S4 i9505:

• Files Needed:. download the ROM Resurrection Remix with Android 6.0.1 Marshmallow to the computer (without extracting the content)

 

• Download the Google Apps package also (gapps).

 

• Connect the Galaxy S4 the computer via USB and copy the .zip file to the SD card smartphone.

 

• Disconnect the USB cable and turn off the Galaxy S4.

 

• Reconnect the smartphone in Recovery mode (simultaneously pressing and holding the Volume buttons up + Home + Power). It is recommended to perform a backup of the current OS via option in their own custom recovery.

 
• Clear data from the internal memory by selecting the option wipe data / factory reset and confirm the process.

 

• Select install zip from sdcard option, look for the Resurrection Remix ROM file on the SD card and confirm the flashing process.

 

• Return to the main menu of custom recovery and select the option to restart the Galaxy S4 I9505, now with the new custom ROM.

 

The first startup may take a little longer than normal, so do not worry. More details can be checked on the dedicated page on XDA forum. The Android Zone Youtube channel also released a tutorial to demonstrate the ROM in action.

The Samsung Galaxy S4 I9505 is available in Trocafone by R $ 550 .

(updated on December 23, 2015 at 04:22)